Comparing Effects of Crumb Rubber and Synthetic Polymers on Hot Mix Asphalt Performance
One of the most widely used bitumen additives is styrene-butadiene-styrene (SBS) polymer. Addition of this polymer has been shown to improve asphalt […]
One of the most widely used bitumen additives is styrene-butadiene-styrene (SBS) polymer. Addition of this polymer has been shown to improve asphalt […]
The Reacted and Activated Rubber (RAR), as an Asphalt Rubber Binder, is composed of plain soft bitumen, fine crumb rubber, and an […]
This paper highlights the aging superiority of asphalt rubber and asphalt rubber hot mixes compared to conventional asphalts and mixes. The paper […]
The paper provides a comparison between two different rubberized asphalt binders; namely asphalt rubber and terminal blend. It discusses the two processes […]
The United States Intermodal Surface Transportation Efficiency Act (ISTEA) of 1991 specified that all asphalt pavement projects funded by federal agencies must […]
The California Department of Transportation (Caltrans) has been using scrap tire rubber in asphalt pavements since the 1970s in chip seals and […]
Since the mid 1960’s the state of Arizona in the United States has used a unique asphalt binder called asphalt-rubber (AR) which […]
The objective of this paper is to provide an overview of the basic information about the design and use of asphalt-rubber (AR) […]
The purpose of this study was to determine the effect of Reclaimed Asphalt Pavement (RAP) and Warm Mix Asphalt (WMA) technology on […]
Crumb rubber derived from used vehicular tires has been used for a wide variety of industrial applications (1). In the early 1960′s, […]